High Harmonic Current Suppression Three Phase AC Input Line Series Reactor Choke Inductor for VFD/Speed Controller 380V-660V 1A-1500A with F Level Insulation

Product Description

 

Product Description

Product Description

An reactor is also called an inductor. When a conductor is energized, it will generate a magnetic field within a certain space occupied by it.However, the inductance of the long direct conductor is small and the magnetic field is not strong.Sometimes, in order to give the solenoid a greater inductance, an iron core is inserted into the solenoid, called an iron core reactor.
 

Purposes of reactor:

1.Current limiting reactor.It is with power circuit in series to restrict value of short-circuit current.

2.Paralleling reactor.It is generally connected between end side of ultrahigh voltage transmission wire and ground and has the action of reactive power compensation.

3.Communication reactor.It is also known as wave absorber.It is connected in series in the power transmission line for communication line to resist carrier signal and make it into receiving equipment.

4.Arc suppression reactor.It is also called as arc suppression coil.Connected between neutral point of 3-phase transformer and ground for supplying inductive current when one phase of 3 phase power grid is grounded,to compensate capacitive current going through the grounding point,cause uneasy ignition due to arc and remove overvoltage due to multiple ignitions of arc.

5. Harmonic Filter Reactor.It is used for ripple wave amplitude of bamboo current in rectification circuit;it can move the voltage or current of a harmonic wave of power circuit which formed a circuit with capacitors to generate resonance at a frequency.

6.Electric furnace reactor.It is connected in series with electric furnace transformer to restrict its short-circuit current.

7.Starting reactor.It is connected in series with motor to restrict its starting current.

Product Parameters

Technical parameters:

  1.Insulation resistance:1000VDC Insulation resistance≥100MV;

    2.Dielectric strength:iron core-winding 3000VAC/50Hz/5mA/10s non arc breakdown (testing at factory)

    3.Input reactor noise:less than 65dB(testing at the horizontal distance of 1m to the reactor)

    4.Rated working voltage:380V/50Hz or 660V/50Hz

    5.Protection level:IP00

    6.Insulation grade:above F

    7.Insulation structure:dry type reactor

    8.With/without iron core:iron core reactor/air core reactor

    9.Product certification:CE

    10.Rated current:3-2000(A)

    11.Rated voltage of system:0.69/1.14(kV)

    12.Applicable standard:

      (1)1987 reactor

      (2)GB10229-88 reactor(eqv IEC289:1987)

      (3)JB9644-1999 reactor for electric drive of semi-conductor

 

Action of reactor:

The current limitation and wave filtration of reactor can restrict the short-circuit current of transmission line and protect electric equipment.Reactors must be installed.Reactors can reduce short-circuit and keep the voltage of system unchanged at the moment of short circuit.A damping reactor(i.e. series reactor)is stalled in the circuit of reactor,which has the action of depressing surge when active.It forms harmonic circuit with capacitors and takes the action of harmonic filtration.

 

Capacity of frequency converter(KW)	Input reactor Model N.o.	Dimension: L(A)xW(B)xH(H) (mm)	Install dimension  E×F (mm)	Output reactor Model N.o.	Dimension: L(A)×W(B)×H(H)  (mm)	Install dimension E×F (mm)
0.75	0200075	140×80×140	80×50	0100075	140×80×140	80×50
1.5	0200150	140×80×140	80×50	0100150	140×80×140	80×50
2.5	0200250	140×80×140	80×50	0100250	140×80×140	80×50
4	0200400	140×80×140	80×50	0100400	140×80×140	80×50
5.5	0200550	150×90×140	120×55	0100550	140×90×140	120×55
7.5	0200750	150×110×130	120×55	0100750	150×110×130	120×55
11	201100	150×120×130	120×60	0101100	150×120×130	120×60
15	0201500	150×120×130	140×70	0101500	150×120×130	140×70
18	0201800	175×150×130	140×70	0101800	175×150×130	140×70
22	0202200	175×150×130	140×70	0102200	175×150×130	140×70
30	0203000	200×150×160	170×80	0103000	200×150×160	170×80
37	0203700	200×150×160	170×80	0103700	200×150×160	170×80
45	0204500	240×140×190	200×80	0104500	240×140×190	200×80
55	0205500	240×150×190	200×90	0105500	240×150×190	200×90
75	0207500	240×160×190	200×100	0107500	240×160×190	200×100
90	0209000	260×190×270	220×110	0109000	260×190×270	220×110
110	02110000	260×190×270	220×110	01110000	260×190×270	220×110
132	02132000	270×190×280	220×120	01132000	270×190×280	220×120
160	02160000	300×195×290	250×120	01160000	300×195×290	250×120
187	02187000	320×195×290	250×120	01187000	320×195×290	250×120
200	02200000	320×195×290	250×120	01200000	320×195×290	250×120
220	02220000	320×210×300	250×130	01220000	320×210×300	250×130
250	2250000	320×210×300	250×130	01250000	320×210×300	250×130
315	02315000	340×240×300	270×140	YLLK01315000	340×240×300	270×140
375	02375000	380×250×360	300×150	YLLK01375000	380×250×360	300×150
400	02400000	380×250×360	300×150	YLLK01400000	380×250×360	300×150

Action of reactor:

The current limitation and wave filtration of reactor can restrict the short-circuit current of transmission line and protect electric equipment.Reactors must be installed.Reactors can reduce short-circuit and keep the voltage of system unchanged at the moment of short circuit.A damping reactor(i.e. series reactor)is stalled in the circuit of reactor,which has the action of depressing surge when active.It forms harmonic circuit with capacitors and takes the action of harmonic filtration.

 

Company Profile

Shenzhen Xin Poming Power Equipment Manufacturing Co., Ltd is established in Guangdong Province of China in 2007, which manufactures and sells voltage regulators, transformers, UPSs, frequency converter, DC power sources and other power products and can provide systemic power solutions for customers with it's complete product list For clients around the world .

Certifications

 

FAQ

Q1: What is the MOQ ?

A1: 1 set.

Q2: Is OEM/ODM available?
A2: Yes, it is! Our products can be Customized. We have design and engineer teams,we can customize products according to customers' drawing or requirements.

Q3: Can we put/show our own Logo on your products?
A3: Yes.

Q4: What is the Terms of Payment?
A4: T/T, Western Union.

Q5: Can you offer Form A or Form E or C/O ? 
A5: Yes, no problem, we can apply for it from our local government.

Q6: How is the delivery time ? 
A6: It depends your order quantity and it normally takes 3-20 days .

Q7: How long is the service life ?
A7: It is 20-30 years. 

Q8: How long is the warranty ?
A8: Within one year from the sale date, if there are any accessory problems,
you just provide the photos of damaged accessory, then we will provide free accessory.
According to the number of products, we will provide easily damaged accessories for free.
We also can provide technical support if you need.

You're welcomed to contact us for any questions.